MOSIS FAQs: Fabrication Processes
The most frequently asked questions about fabriction processes available through MOSIS.
1.0 What fabrication processes are available through MOSIS?
2.0 How can I obtain more information about a particular process?
3.0 How can I obtain layer thickness information for MOSIS wafers?4.0 Can I obtain information like doping levels for a particular process?
5.0 Which MOSIS processes support MEMS fabrication?
1. What fabrication processes are available through MOSIS?
All of the fabrication processes available through MOSIS are listed on the MOSIS web page, Fabrication Processes Available Through MOSIS
2. How can I obtain more information about a particular process?
Our vendors consider their design rules, process specifications, and SPICE corner parameters to be proprietary and have established different avenues for their distribution.
Please see Fabricator Design Rules, SPICE parameters for MOSIS Process for the most current information by vendor.
SPICE parameters may be used as design references, but no quantity derived from a simulation should be treated as a manufacturing tolerance
3. How can I obtain layer thickness information for MOSIS wafers?
Layer thickness information is normally included in a wafer fabricator's process specifications. These can be obtained by following the instructions in Section 2 above.
4. Can I obtain information like doping levels for a particular process?
Fabricators do not provide this type of information about their processes.
5. Which MOSIS processes support MEMS fabrication?
For information on MEMS available through MOSIS, see Micromechanical Devices (MEMS)